September 20, 2001

PUBLICATIONS:

1. "Fiber Texture and Magnetic Anisotropy in Evaporated Iron Films", J. Appl. Phys. 33, 949 (1962), A. Yelon, J. R. Asik, and R. W. Hoffman.

2. "Spin-Flip Scattering of Conduction Electrons from Impurities", Phys. Rev. Letters 16, 740 (1966), J. R. Asik, M. A. Ball, and C. P. Slichter.

3. "Spin-Flip Scattering of Conduction Electronics from Impurities", Proc. of XIVth Colloque Ampere in Magnetic Resonance and Relaxation, edited by R. Blinc, North-Holland Publishing Co. (1967), p. 448, J. R. Asik, M. A. Ball, and C. P. Slichter.

4. "Ferromagnetism in VAu₄ and Related Compounds", J. Appl. Phys. 40, 1385 (1969), J. R. Asik, R. J. Gambino, and T. R. McGuire.

5. "Spin-Flip Scattering Cross Section for Conduction Electrons of Foreign Atoms in Lithium and Sodium,” Part I. Phys. Rev. 181, 662 (1969), M. A. Ball, J. R. Asik, and C. P. Slichter.

6. "Spin-Flip Scattering of Electrons from Atoms Embedded in Metals", Magnetic Resonance, pp. 187-195, edited by C. K. Coogan et al., (Plenum Press, 1970), J. R. Asik, M. A. Ball, E. K. Cornell, and C. P. Slichter.

7. "Magnetization and Susceptibility Measurements of VAu₄ and Related Compounds", SR 70-143, J. R. Asik, R. J. Gambino, and T. R. McGuire.

8. "NMR Spin Echo Study of Ni⁶¹ in Natural Nickel". Bulletin of APS 16, 403 (1 March 1971), J. R. Asik and Mary Beth Stearns.

9. "A Magnetization and Susceptibility Study of the Order-Disorder Transformation in VAu₄: Short Range Order", J. Phys. Chem. Solids, 1972, Vol. 33, pp. 391-399, J. R. Asik, R. J. Gambino, and T. R. McGuire.

10. "Short Range Order in Au4V", A.I.P. Conference Proceedings on Magnetism and Magnetic Materials, 1972, p. 503, J. R. Asik, R. J. Gambino, and T. R. McGuire.

11 "High Frequency Hysteresis Loops of High Voltage Ferrite Pot Core Transformers", SR Report, Oct. 9, 1973, J. R. Asik. Also, A.I.P. Conference Proceedings No. 18, Magnetism and Magnetic Materials, 1974, p. 1349.

12. "A Study of Ignition System Effects on Power, Emissions, Lean Misfire Limit, and EGR Tolerance of a Single Cylinder Engine - Multiple Spark versus Conventional Single Spark Ignition", SAE Paper No. 740188, J. A. Harrington, R. C. Shishu, and J. R. Asik.

13. "Combustion Initiation in Otto Cycle Engines", Proceedings of the Low Pollution Power Systems Development Meeting (LPPSD), Dusseldorf, W. Germany, Nov. 4, 1974, D. F. Moyer, J. R. Asik, W. G. Rado, and A. H. Turner.

14. "The Ferroresonant Capacitor Discharge Ignition (FCDI) System: A New Application of Ferroresonance", IEEE Applied Magnetics Workshop Proceedings, June 5-6, 1975, Milwaukee, Wis. J. R. Asik. Also, SR 75-57.

15. "The Ferroresonant Capacitor Discharge Ignition (FCDI) System: A Multiple Firing CD Ignition with Spark Discharge Sustaining between Firings", SAE Paper No. 760266, J. R. Asik and B. Bates. Also, SR 75-103.

16. "Design of a Plasma Jet Ignition System for Automotive Application", SAE Paper No. 770355, J. R. Asik, P. Piatkowski, M. J. Foucher, and W. G. Rado.

17. "A Distributorless Ignition System: Solid State High Voltage Distribution with Low RFI Emissions", SR 77-90. Also, SAE Paper No. 780327, J. R. Asik, D. F. Moyer, and W. G. Rado.

18. "Implementation of Direct Fuel Control (DFC) on a Lean Burn/Fast Burn Engine (PROCO)", Proceedings of Ford Powertrain Electronic Controls Technical Exchange Seminar, June 16-18, 1982, J. R. Asik (Proprietary Publication).

19. "Direct Fuel Control with Application to PROCO", Paper to Ford Research Informal Seminar on Dynamic Control and Modeling, July 29, 1982 (Proprietary Paper).

20. "Ignitability Experiments in a Fast Burn Lean Burn Engine", SAE Paper No. 830477, R. W. Anderson and J. R. Asik.

21. "Direct Fuel Injection with Electromagnetic Spill Control-Investigation with the EME-4 Pump", SAE Paper No. 840308, M. M. Schechter and J. R. Asik.

22. "Ignition Systems", Sixth Edition of McGraw Hill Encyclopedia of Science and Technology, 1985, J. R. Asik.

23. "Knock", Sixth Edition of McGraw Hill Encyclopedia of Science and Technology, 1985, J. R. Asik.

24. "Lean Air-Fuel Ignition System Comparison in a Fast-Burn Engine", SAE Paper No. 850076, R. W. Anderson and J. R. Asik.

25. "Relocating Cross Assembler and Pascal-J", Ford Third Worldwide Powertrain Electronics Conference", March 2, 1987, J. C. Carnes, M. R. Wayne, and J. R. Asik (Proprietary Publication).

26. "Direct Fuel Control for Dilute Charge Engines", D. K. Trumpy and J. R. Asik, Paper to Ford Third Worldwide Electronics Conference, March 2, 1987 (Proprietary Paper).

27. "Speed-Throttle-Adaptive Strategy for the CT-20 Engine", Ford Third Worldwide Powertrain Electronics Conference, March 2, 1987, J. R. Asik, R. G. Samson, and T. D. Barker (Proprietary Publication).

28. "Distributorless Ignition System Fresh Eyes Report", Final Report to Messrs. J. A. Betti, S. M. Frey, F. E. Macher, J. A. Manoogian, J. J. Paulsen, and W. F. Powers. Oct. 28, 1987. J. R. Asik contributed sections of Report on "System Issues" and "Coil Issues" (Proprietary Publication).

29. "U3240 - Fast Response, Adaptive Powertrain Controls", J. R. Asik and D. K. Trumpy, Paper to Ford Powertrain Technology Council, July 14, 1989 (Proprietary Paper).

30. "CFAC (Coordinated Fuel and Air Control) Customer Review", Final Report to Messrs. W. R. Wade, D. Davis, J. E. Aulier, L. J. Ward, and F. Yeung. July 13, 1989. Report prepared by J. R. Asik (Proprietary Publication).

31. "Status of EGR Flow Diagnostics Team", Paper to Ford OBD-II Steering Team, J. R. Asik, June 28, 1990 (Proprietary Paper).

32. "Individual Cylinder A/F Control", Sixth Ford Worldwide Powertrain Electronics Conference", Dearborn, MI, October 1990, J. R. Asik (Proprietary Publication).

33. "OBD-II EGR Monitor Design and Validation: More Than Electronics", Joseph R. Asik, Paper to Ford Automotive Electronics Seminar, Nov. 22, 1991 (Proprietary Paper).

34. "Ford-Mazda Lean Burn Engine Controls Review", J. R. Asik, D. K. Trumpy, R. G. Samson, and G. M. Meyer. Submitted to W. R. Wade, L. R. Ward, and T. Ikeda (Mazda), March 18, 1992 (Proprietary Paper).

35. "Lean Burn Engine Control Discussions", Paper to Ford Lean Burn PMT, J. R. Asik, June 23, 1992 (Proprietary Paper).

36. "Mass Air Flow Sensors: ULEV & Stage III Requirements", Ford-Bosch Technical Exchange, Jan. 21, 1993. By J. R. Asik (Proprietary Paper).

37. "NAAO Powertrain Research: EAO Stage III Controls Review-Interim Status Report: Improved Air Charge, Improved Transient AFR Control, Electric EGR, Synthetic HEGO, Vehicle Prove Out", Dearborn, MI, March 29, 1994. Paper presented to Mr. M. Gidlow. Report prepared by J. R. Asik (Proprietary Publication).

38. "NAAO Powertrain Research-EAO Stage III Controls Review-Status Report", Dunton, UK, June 23, 1994. Report prepared by J. R. Asik (Proprietary Paper).

39. A. W. Olbrot, M. H. Berri, and J. R. Asik, "Robust Parametrized Controller Design with an Application to Exhaust Gas Recirculation (EGR) System", Proc. IEEE Conference on Decision and Control, 1995, pp. 3557 - 3560.

40. "Modeling of the Manifold Filling Dynamics", by E. Hendricks, A. Chevalier, M. Jensen, S. Sorenson, D. Trumpy, and J. R. Asik, SAE Paper No. Paper No. 960037, Feb. 1996.

41. "A/F Ratio Estimation and Control Based on Induced Engine Roughness", Joseph R. Asik, Garth M. Meyer, and Donald X. Tang, IEEE Control Systems Magazine, pp. 35-42, December, 1996.

42. "Transient A/F Ratio Estimation and Control Using a Neural Network", J. R. Asik, J. M Peters, G. M Meyer, and D. X. Tang, SAE Paper No. Paper 970619, Feb. 24, 1997.

43. "Parameter Scheduling Controller for an EGR System", A. Olbrot, M H. Berri, and J. R. Asik, SAE Paper No. 970620, Feb. 24, 1997.

44. A. W. Olbrot, M. H. Berri, and J. R. Asik, "Robust Parameterized Controller Design with an Application to Exhaust Gas Recirculation (EGR) System", Proc. IEEE Conference on Decision and Control, 1995, pp. 3557 - 3560.

45. E. Hendricks, A. Chevalier, M. Jensen, S. Sorenson, D. Trumpy, and J. R. Asik, "Modeling of the Manifold Filling Dynamics”, SAE Paper No. Paper No. 960037, Feb. 1996.

46. J. R. Asik, G. M. Meyer, and D. X. Tang, “A/F Ratio Estimation and Control Based on Induced Engine Roughness”, Proceedings of 1996 IEEE International Conference on Control Applications, Dearborn MI – Sept. 15-18, 1996, pp. 781-785.

47. Joseph R. Asik, Garth M. Meyer, and Donald X. Tang, "A/F Ratio Estimation and Control Based on Induced Engine Roughness", IEEE Control Systems Magazine, pp. 35-42, December 1996.

48. J. R. Asik, J. M Peters, G. M Meyer, and D. X. Tang, "Transient A/F Ratio Estimation and Control Using a Neural Network", SAE Paper No. Paper 970619, Feb. 24, 1997.

49. A. Olbrot, M H. Berri, and J. R. Asik, "Parameter Scheduling Controller for an EGR System", SAE Paper No. 970620, Feb. 24, 1997.

50. X. (Don) Tang and J. R. Asik, "Oscillating Heat Transfer in Reversing Pipe Flow", SAE Paper 980061, Feb. 23, 1998.

51. X. Tang, J. R. Asik. G. M. Meyer, and R. G. Samson, "Optimal A/F Ratio Estimation Model (Synthetic UEGO) for SI Engine Cold Transient AFR Feedback Control", SAE Paper 980798, Feb. 23, 1998.

52. J. R. Asik, "Past, Present, and Future of Engine Controls", Proceedings of SAE Electronic Engine Controls TOPTEC, Dec. 3, 1997.

53. J. R. Asik, R. Farkas, R. Beier, and G. M. Meyer, "Closed Loop Measurement of NOx Storage Capacity and Oxygen Storage Capacity of a Lean NOx Trap", SAE Paper 1999-01-1283.

54. J. R. Asik and G. M. Meyer, “Closed Loop Temperature Control of a Lean NOx Trap During Desulfation”, Proceedings of 1999 American Control Conference (San Diego), pp. 1213-1216, June 1999.

55. Joseph R. Asik and Garth M. Meyer, “Lean NOx Trap Desulfation Through Rapid Air Fuel Modulation”, SAE Paper 2000-01-1200, March 9, 2000.

56. Alexander V. Golovin and Joseph R. Asik, “Modeling and Experiments for Lean NOx Trap Desulfation by High Frequency AFR Modulation”, SAE Paper 2000-01-1201, March 9, 2000.

57. J. R. Asik, “Closed Loop Control of Lean NOx Traps”, Proceedings of 4th International Conference –Advanced Microsystems of Automotive Applications, Advanced Microsystems of Automotive Applications 2000”, Springer Verlag; Berlin, Heidelberg, New York.

58. J. R. Asik, M. J. Shidaye, and R. J. Beier, “DynoDAS – A VXI Based Engine Dyno Data Acquisition System”, Proceedings of National Instruments VIP Days Applications Conference, May 2000.

59. J. R. Asik, "Gasoline Engines: Passenger Car Developments – A Short History of Engine Controls", Proceedings of European Powertrain Control (EPC) SAE TOPTEC, May 16, 2000.

60. J. R. Asik, R. J. Beier, and Q. Zhang, “A Dyno Data Acquisition System for Lean NOx Trap Investigations”, SAE Paper 2001-01-0208, March 5, 2001.

61. J. R. Asik, D. A. Dobson, and G. M. Meyer, “Suppression of Sulfide Emission During Lean NOx Trap Desulfation”, SAE Paper 2001-01-1299, March 5, 2001.